Exercises pyretic firewall

Exercise: Pyretic Firewall

• Aim: Pyretic based firewall
• Topology [1]
• Put the following files([2]) in folder: pyretic/pyretic/examples
• $ sudo mn --controller remote --topo=single,3 --mac --arp

• (20P) Run the pyretic hub example
  • • $ pyretic.py –v high pyretic.examples.pyretic_hub
  • Verify that the hosts can ping each other
    • > xterm h1 h2 h3
    • h2$ tcpdump -xx -n -i h2-eth0
    • h3$ tcpdump -xx -n -i h3-eth0
    • h1$ ping -c1 10.0.0.2
  • Observe what happens when you do
    • h1$ ping -c1 10.0.0.5
  • Look into the hub code: pyretic/pyretic/examples/pyretic_hub

• (20P) Run the pyretic switch example
  • • $ pyretic.py –v high pyretic.examples.pyretic_switch1
  • Verify that the hosts can ping each other
    • > xterm h1 h2 h3
    • h2$ tcpdump -xx -n -i h2-eth0
    • h3$ tcpdump -xx -n -i h3-eth0
    • h1$ ping -c1 10.0.0.2
  • Observe what happens when you do
    • h1$ ping -c1 10.0.0.5
  • Look into the switch code: pyretic/pyretic/examples/pyretic_switch1.py

• (60P) Implement a layer 2 firewall that runs alongside the MAC learning module on the pyretic OpenFlow Controller.
  • Your firewall should be agnostic to the underlying topology
  • Write code to block h1 to h2 and h2 to h1 (Mac IDs: 00:00:00:00:00:01, 00:00:00:00:00:02)
  • Start with pyretic_firewall.py
  • See in pyretic_firewall.py for instructions on how to test the code as well as how to write the code
  • To Test run:
    • sudo mn --controller remote --topo=single,3 --mac --arp
    • pyretic.py –v high pyretic.examples.pyretic_firewall