Seminar on Internet Technologies (Summer 2020)

Details

Workload/ECTS Credits:	5 ECTS (BSc/MSc AI); 5 (ITIS)
Lecturer:	Prof. Xiaoming Fu
Teaching assistant:	Shichang Ding and Sripriya Srikant Adhatarao
Time:	April 16'*, 14:00ct: Introduction Meeting*
Place:	IFI Building, Room 1.101
UniVZ	[1]

Note:

Course description

This course covers selected topics on the up-to-date Internet technologies and research. Each student takes a topic, does a presentation and writes a report on it. Besides the introduction meeting, there are no regular meetings, lectures or classes for this course. The purpose of this course is to familiarize the students with new technologies, enable independent study of a specific topic, and train presentation and writing skills.

The informational meeting at the beginning of the course will cover some guidelines on scientific presenting and writing.

Due to topic advisors' workload limitation, we could only provide limited topics, and the topic assignment will be on the basis of first come first serve principle. Please contact the topic advisor directly for the topic availability.

Note: Participants in the seminar only need to register the exam before the end of the course.

Passing requirements

There will be 2 milestones before the presentations where the students should pass before they register for the course.
- Intro milestone where the adviser make sure that the student starts to work on the topic and follows an accepted methodology.
- Midterm milestone. (ex. programming tasks done etc... )

Actively and frequently participate in the project communication with your topic advisor
- This accounts for 20% of your grade.
Present the selected topic (20 min. presentation + 10 min. Q&A).
- This accounts for 40% of your grade.
Write a report on the selected topic (12-15 pages) (LaTeX Template:[2]).
- This accounts for 40% of your grade.
Please check the #Schedule and adhere to it.

Schedule

April. 16, 12:00hr: Introduction meeting
June. 20 : Deadline for registration
July. 2 and July. 3, 13:00-17:00 : Presentations IFI Building, Room 1.101
Sep. 10, 2019, 23:59: Deadline for submission of report (should be sent to the topic adviser!)

Topics

Topic	Description	Prerequisites	Topic Advisor	Initial Readings
Knowledge Graph for Recommendation System	The success of recommendation system makes it prevalent in Web applications, ranging from search engines, E-commerce, to social media sites and news portals.To predict user preference from the key (and widely available) source of user behavior data, much research effort has been devoted to collaborative filtering (CF). Despite its effectiveness and universality, CF methods suffer from the inability of modeling side information, such as item attributes, user profiles, and contexts, thus perform poorly in sparse situations where users and items have few interactions.To address the limitation of CF models, a solution is to take the graph of item side information, aka. knowledge graph into account to construct the predictive model.	Interested in this topic, patience and time for reading and concluding multiple papers.	[Shichang Ding,sding@gwdg.de]	[3]
Empirical study for QUIC Protocol	Quick UDP Internet Connections (QUIC) is a new transport protocol developed by Google in 2012. QUIC is considered as a combination of TCP, TLS and HTTP on the top of UDP with some advantages such as reducing connection establishment time, improving congestion control, multiplexing without heads of line blocking and connection migration.	Programming skills. Interested in this topic, willing to follow the advisor's guidance, patience and time for reading multiple papers	[Yali Yuan, yali.yuan@cs.informatik.uni-goettingen.de]	[4]
Failure recovery from the breakpoint in service function chain	As we all know, if the packets are dropped in network, we need to retransmit them from the sender. However, in service function chain, failure links or nodes may drop packets that have already been processed by upstream NFs, retransmission from the sender may result in wasted work in the service chain. If we use SRv6 to steer traffic along with SFC, we could easily know the IP address of upstream NF, then we can leverages this information to realize in-network recovery. This project focuses on realizing in-network recovery with SRv6.	The student should know the basic knowledge about TCP/IP, network simulation	[Bangbang Ren, bangbang.ren@cs.uni-goettingen.de]
Learning Combinatorial Optimization Algorithms over Graphs	There are many NP-hard problems about graph. However, these NP-hard problems cannot be soloved fast by optimization solver. Approximation algorithms could solve them fast in the cost of sacrificing the accuracy. Recently, some algorithms based on machine learning have been proposed to solve these NP-hard problems in the manner of end-to-end. After reproducing one classical paper, the student is required to find solution for a new assignment problem	The student should be familiar with machine learning and Integer linear programming	[Bangbang Ren, bangbang.ren@cs.uni-goettingen.de]

Workﬂow

1. Select a topic

A student picks a topic to work on. You can pick up a topic and start working at any time. However, make sure to notify the advisor of the topic before starting to work.

2. Get your work advised

For each topic, a topic advisor is available. He is your contact person for questions and problems regarding the topic. He supports you as much as you want, so please do not hesitate to approach him for any advice or with any questions you might have. It is recommended (and not mandatory) that you schedule a face-to-face meeting with him right after you select your topic.

3. Approach your topic

By choosing a topic, you choose the direction of elaboration.
You may work in different styles, for example:
- Survey: Basic introduction, an overview of the ﬁeld; general problems, methods, approaches.
- Specific problem: Detailed introduction, details about the problem and the solution.
You should include your own thoughts on your topic.

4. Prepare your presentation

Present your topic to the audience (in English).
20 minutes of presentation followed by 10 minutes discussion.

You present your topic to an audience of students and other interested people (usually the NET group members). Your presentation should give the audience a general idea of the topic and highlight interesting problems and solutions. You have 20 minutes to present your topic followed by 10 minutes of discussion. You must keep it within the time limit. Please send your slides to your topic advisor for any possible feedback before your presentation.

Hints for preparing the presentation: 20 minutes are too short to present a topic fully. It is alright to focus just on one certain important aspect. Limit the introduction of basics. Make sure to ﬁnish in time.

Suggestions for preparing the slides: No more than 20 pages/slides. Get your audiences to quickly understand the general idea. Figures, tables and animations are better than sentences. Summary of the topic: thinking in your own words.

5. Write your report

Present the problem with its background.
Detail the approaches, techniques, methods to handle the problem.
Evaluate and assess those approaches (e.g., pros and cons).
Give a short outlook on potential future developments.

The report must be written in English according to common guidelines for scientific papers, between 12 and 15 pages of content (excluding the table of content, bibliography, etc.).

6. Course schedule

There are no regular meetings, lectures or classes for this course. The work is expected to be done by yourself with the assistance of your topic advisor. Please follow the #Schedule to take appropriate actions.